Untitled Page

1 -فروش
فروش انواع دستگاه های اندازه گیری تک بعدی و دو بعدی ( ارتفاع سنج قطعات - میکرو هایت )
نماینده انحصاری شرکت تریموس سوئیس در ایران TRIMOS
نماینده انحصاری شرکت سیلواک سوئیس در ایران SYLVAC

2 - خدمات فنی مهندسی
آموزش کامل اپراتوری و نرم افزاری
تعمیر و تعویض قطعات
تامین لوازم جانبی

3 - کالیبراسیون
کالیبره انواع دستگاه ارتفاع سنج
صدور برگه تست و گواهی کالیبراسیون با تاییدیه اداره استاندارد و 17025

گالری
مشخصات ارتفاع سنج سیلواک
کاتالوگ

• Intuitive functions
• 400 and 600 mm versions
• Robust mechanics with improved blocking system
• Data outputs : PROXIMITY, POWER and Bluetooth®
• Introduction of a constant

گالری
مشخصات ارتفاع سنج سیلواک
کاتالوگ

• Intuitive functions
• Great mobility
• Measurement of internal and external diameters, centerlines, heights, thicknesses, depths, surfaces
• 150, 300 and 450 mm range
• Data output USB and RS232
• Extremely low and adjustable measuring force according to the probe
• No influence of the operator on the measurement results
• Battery life: 40 hours
• Probe constant value memorized even when switched off
• Ergonomic motorized displacement paddle

نزدیک به نیم قرن تجربه - شروع فعالیت از سال 1972

بیش از 40 نماینده رسمی در دنیا

طراحی محصولات توسط تیم کاملا حرفه ای

دارای گواهی نامه ایزو

پیشتاز در اختراع و نوآوری

ساخت سوئیس

استحکام عالی و انعطاف پذیری دستگاه ارتفاع سنج Trimos اجازه می دهد تا تکرار پذیری ( repeatability ) دستگاه با استفاده از پراب های بسیار متنوع تا طول 400 میلی متر بسیار مهیج و نفس گیر باشد.

سیستم فوق العاده اندازه گیری قطر برای دستیابی به تجربه اندازه گیری بی نظیری از لحاظ راحتی و سرعت و همچنین دقت طراحی شده است.

دقت منحصر به فرد و قابلیت اطمینان بسیار بالا در ارتفاع سنج های تریموس از نکات چشم گیر این دستگاه می باشد.

حرکت به دو صورت دستی و موتورایز در کنار هم نوآورانه بوده که در دستگاه های مشابه وجود ندارد و حق انتخاب و راحتی کار به اپراتور را می دهد .

نمایشگر لمسی با کارکرد سریع و آسان به صورت گرافیکی

بالشتک هوا جهت جابجایی آسان روی سطح

انتقال اطلاعات از طریق USB ، RS232 یا به صورت بی سیم WIRELESS

طیف وسیعی از لوازم جانبی موجود تمام خواسته ها را پوشش می دهد. سیستم جبران کننده وزن منحصر به فرد نیز امکان استفاده از پراب های خاص تا وزن 400 گرم را فراهم می کند.

ارتفاع سنج تریموس در سایزها و مدل های مختلف بین 400 ، 700 ، 1100 و 1800 میلیمتری در دسترس هستند.

مزایا
گالری
مشخصات
کاتالوگ

Measuring ranges 400 and 700 mm
Extremely easy to use
Electronically adjustable measuring force
Autonomy: 40 h (lithium-ion batteries)
Standard probes up to 400 mm
Vast range of accessories
All adjustments possible without tools
RS232 et USB interfaces
Wireless data transfer (optional)

The height gauge V3 have been developed for the most difficult workshop environments. Manufactured in their entirety in Switzerland, they will guarantee a robust, precise and reliable product on the long run.

For more than 40 years Trimos philosophy has been to offer easy-to-use instruments that are very efficient in production environment.

The display unit provides functions that are directly accessible and depicted with symbols easy to understand.

This allows for easy and quick handling even by unqualified personnel. The large 2-line « Black Mask » display offers an exceptional contrast in all lighting conditions, a unique characteristic on the market.

The V3 measuring column represents the entry-level of Trimos universal measuring columns. It fully benefits from the developments realized on superior models. A robust and easy-to-use instrument including all functions essential for a use in the workshop.

مزایا
گالری
مشخصات
کاتالوگ

Measuring ranges 400 and 700 mm
Extremely easy to use
Electronically adjustable measuring force
Autonomy: 40 h (lithium-ion batteries)
Standard probes up to 400 mm
Vast range of accessories
All adjustments possible without tools
RS232 et USB interfaces
Wireless data transfer (optional)

The height gauge V4 have been developed for the most difficult workshop environments. Manufactured in their entirety in Switzerland, they will guarantee a robust, precise and reliable product on the long run.

For more than 40 years Trimos philosophy has been to offer easy-to-use instruments that are very efficient in production environment.

The display unit provides functions that are directly accessible and depicted with symbols easy to understand.

This allows for easy and quick handling even by unqualified personnel. The large 2-line « Black Mask » display offers an exceptional contrast in all lighting conditions, a unique characteristic on the market.

The V4 measuring column offers the same functions as the V3. In addition it is equipped with a second probe holder as well as with an air cushion for easy displacement on the measuring table. The programmable functions buttons of the handle allow a quick access to the functions most used.

مزایا
گالری
مشخصات
کاتالوگ

Measuring ranges 400, 700 and 1100 mm
Extremely easy to use
Electronically adjustable measuring force
Manual or motor-driven displacement
Standard probes up to 400 mm
Vast range of accessories
All adjustments possible without tools
RS232 et USB interfaces
Wireless data transfer (optional)

The height gauge V5 is the descendant of the legendary V+ line, from which thousands of copies have already been sold in workshops all over the world and are universally recognized for their easy use and their high quality.

Trimos was the first to offer vertical measuring instruments on the market more than 40 years ago. The V5 represent a consolidation of know-how accumulated over the years. The very legible display and the user-friendly functions offer exceptional comfort use. But that’s not it: The V5 is equipped with a revolutionary displacement handwheel which offers its user the choice of the displacement mode of the measuring carriage, either manual or motor-driven. Each one of these modes, suffers from no compromise, which means that the user who prefers a manual instrument will not notice a difference with a classic manual instrument and the same applies to the motor-driven displacement. This innovation avoids having to make a difficult choice during the purchase and can accommodate multiple potential users with the same instrument.

The design of the V5 with its side probe holders revives an old Trimos tradition: They enable measuring with long, robust probes guaranteeing an excellent repeatability.

مزایا
گالری
مشخصات
کاتالوگ

Measuring ranges 400, 700 and 1100 mm
Extremely easy to use
Electronically adjustable measuring force
Manual or motor-driven displacement
Standard probes up to 400 mm
Vast range of accessories
All adjustments possible without tools
RS232 et USB interfaces
Wireless data transfer (optional)

The height gauge V6 is the descendant of the legendary V+ line, from which thousands of copies have already been sold in workshops all over the world and are universally recognized for their easy use and their high quality.

Trimos was the first to offer vertical measuring instruments on the market more than 40 years ago. The V6 represent a consolidation of know-how accumulated over the years. The very legible display and the user-friendly functions offer exceptional comfort use. But that’s not it: The V6 is equipped with a revolutionary displacement handwheel which offers its user the choice of the displacement mode of the measuring carriage, either manual or motor-driven. Each one of these modes, suffers from no compromise, which means that the user who prefers a manual instrument will not notice a difference with a classic manual instrument and the same applies to the motor-driven displacement. This innovation avoids having to make a difficult choice during the purchase and can accommodate multiple potential users with the same instrument.

The design of the V6 with its side probe holders revives an old Trimos tradition: They enable measuring with long, robust probes guaranteeing an excellent repeatability.

مزایا
گالری
مشخصات
کاتالوگ

Measuring ranges 400 to 1800 mm
Simple and easy-to-use graphic interface
Electronically adjustable measuring force
Manual or motorized displacement
2d, programming, statistics
Large range of accessories
All possible adjustments without tools
Interfaces RS232 and USB
Wireless data transfer (optional)

The height gauges V7 combine technological innovation and tradition.

With their touch-display and lateral insert holders, which have proven their worth for decades, the V7 rank as universal instruments for the workshop.

In spite of an entirely revisited interface, Trimos instruments philosophy has been maintained and the user will have no difficulty whatsoever to rapidly take it in hand.

The touch display allows a maximal simplified use as no superfluous information is displayed and therefore the number of functions buttons is limited to what is strictly necessary.

Functions, normally considered as complex, such as 2D, programming, statistics, become child’s play. It results in an unequalled ease of use and therefore a substantial increase in productivity.

The pair of lateral insert holders comes from generations of instruments that have forged the reputation of Trimos. Their great robustness and flexibility allow the use of very diverse probes up to 400 mm long with a breath-taking repeatability.

The V7 are equipped with the revolutionary displacement handwheel allowing the user to choose either the manual or motorized displacement mode.

مزایا
گالری
مشخصات
کاتالوگ

Measuring range 400 to 1100 mm
Specific handle for fine adjustment
Manual displacement
Exceptional precision level
Large range of accessories
All possible adjustments without tools
Interfaces RS232 and USB
Wireless data transfer (optional)

After the very successful launch of the V-line height gauges, Trimos has developed a new instrument in its height gauge family, the V8.
 
The mechanical design and delivery scope of the V8 are identical to the V9. It shares the features that made the model V9 so successful: extreme precision and repeatability, high resolution, and Swiss made finish. What is to underline about this new model is its specific handle for fine adjustment. Trimos developed this fine adjustment to answer to specific applications requiring a fine adjustment of carriage position.
 
The V8 guarantees, like its predecessors, an extremely easy use with great robustness, flexibility and extreme precision.
 
The large 2-line « Black Mask » display of the V8 offers an exceptional contrast in all lighting conditions. The display provides functions that are directly accessible and depicted with symbols easy to understand.

مزایا
گالری
مشخصات
کاتالوگ

Measuring range 400 to 1100 mm
Exceptional precision level
Electronically adjustable measuring force
Manual or motorized displacement
2d, programming, statistics
Large range of accessories
All possible adjustments without tools
Interfaces RS232 and USB
Wireless data transfer (optional)

The height gauge V9 has been developed for the most demanding users. Laboratories and workshops for whom measuring reliability is determining will fully appreciate its exceptional precision level and its "Swiss Made" finish.

Metrological performances have been the core of the development of this height gauge. No compromise on precision and repeatability have been tolerated. This is why some construction details, particularly probe holders differ from other models.

The display, based on an entirely tactile interface, offers an ease of use never reached yet on a vertical measuring instrument. The menus and functions displayed obey to a very strict philosophy and design. This allows a great efficiency, even in complex tasks such as programming, 2D mode, angles measurements or statistical analysis of results.

The V9 are equipped with a revolutionary displacement handwheel allowing the user to choose either the manual or motorized displacement mode.

مزایا
گالری
مشخصات
کاتالوگ

Robust and compact construction
Perfect for use in production area
Accurate and reliable measurements
User friendly
Opto-RS232 data output
Rechargeable battery pack
Two models : cast iron base or a granite base

The TVM instruments are perfect for height measurements and scribing work and reliable in all kinds of workshop conditions. The result of an unique, compact design of the instrument is great mobility and extreme stability.

Because of its advanced measuring system, the self-contained working time of the TVM is one year. Therefore it can be used for multiple applications in the workshop area. The simplicity of manipulation allows constant change of the user without any time-consuming training.

The success of the TVM among competitive gauges is outstanding. More than 14’000 instruments are in use worldwide. A large range of accessories for all kinds of measuring applications is available.